Hubtex Order Picking Systems
HUBTEX design, develop and manufacture specialist equipment for the handling of long, bulky and difficult loads. Get an overview of our wide and varied range then contact us for a quotation which we will gladly prepare according to your individual requirements.
MU-OP Order Picking Systems
- Operation and use: One-man operation for lightweight profiles; Order picking of up to 6 m long loads
- Load capacity range: 1,000 to 2,500 kg
- Lifting height: up to 7000 mm
- Aisle width: Load depth or cantilever arm length plus 1230 mm (if guided: with 100 mm safety clearance per side)
MU-SO Order Picking Systems
- Operation and use: One-man or two-man operation, also for heavy profiles; Order picking of up to 12 m long loads
- Load capacity range: up to 5.000 kg
- Lifting height: up to 9000 mm
- Aisle width: Load depth or cantilever arm length plus 962 mm (if guided: with 100 mm safety clearance per side)
KP Order Picking Systems
- Load capacity range: 1,500 to 7,000 kg
- Lifting height: up to 10000 mm
- Aisle width: One-sided rack operation in narrow aisle: Load depth or cantilever arm length plus 1350 mm (if guided: with 150 mm safety clearance per side)
- Two-sided rack operation: Load depth plus 1000 mm (if unguided: 500 mm safety clearance per side)
- Order picking rate: Based on 10 – 15 sheets per pick stop: 350 – 400 sheets/day; ca. 1,850 sheets/week; ca. 7,400 sheets/month In this example you need about 3 hours per day to restock the warehouse.
EZK Order Picking Systems
- Operation and use: One-man or two-man
- Load bearing classes: 2,000 to 10,000 kg
- Lifting height: up to 10,000 mm
- Aisle width: At least 2700 mm / maximum aisle width conditional upon load depth. (if guided: 150 mm safety clearance per side)
- Order picking rate: Based on 3 sheets per pick stop: 450 sheets/day; 2,250 sheets/week; 9,000 sheets/month
MK Order Picking Systems
- Operation and use: One-man or two-man operation Warehousing and order picking of doors and frames in pallet racks.
- Load capacity range: 1,500 to 4,000 kg
- Lifting height: up to 75000 mm
- Aisle width: Load depth plus 400 mm (if guided: with 100 mm safety clearance per side)
- Order picking rate: Based on 7 picks per pick stop: 150 picks/day; 750 picks/week; 3.000 picks, sheets/month
CQ Order Picking Systems
- Load capacity range: 3,000 to 20,000 kg
- Lifting height: up to 7500 mm
- Aisle width: Load depth or cantilever arm length plus 1600 mm (if guided: with 100 mm safety clearance per side)
- Order picking ratings: ca. 70 sheets/hour; ca. 420 sheets/day; ca. 2,100 sheets/week; ca. 8,400 sheets/month On average 27 sheets are taken into consideration for one order-picking operation. Approximately 2 hours per day are taken into consideration for refilling the racks.